Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

8 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

14 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

57 views

Finally swapped out those Hayes 9's from 2003 or so for a set of Avid Code 5's. Just have to change out the Hyd Hoses (Rear was too short) It was either blue, yellow or pink ... or spend too much $$. Bike has a lot of blue now

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Drivetrain

20 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Drivetrain

7 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Drivetrain

16 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

138 views | 2 comments

Here's what we have to start with, one stock Cannondale Gemini 900 frame. Huge parts list to fill and breakdown and clean all pivots and check welds.

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Deleted

134 views | 2 faves

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

53 views

Not the cleanest lines I've ever done ... but for a first attempt and hand cutting stencils it will do.

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

95 views | 2 comments

Looking good

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

129 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

178 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

175 views

2x10 drivetrain was the best idea ever for this bike.

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

109 views | 1 faves

Wompatuck

Finally got a test ride in on the new bike.

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Other

59 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Other

54 views

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Other

56 views

24.69mm from peak to peak of the hex, consistent on all sides

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Parts - Other

43 views

22.92mm from flat to flat side of the hex torqued. Consistent on all sides

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

76 views

"Black Friday" deals at Pricepoint.com, drivetrain will be a 2x10 system

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

80 views | 1 comments

GREAT Deals at Blueskycycling.com, rims are Shimano XT Disc Wheelset w/ Mavic double wall 32 mm wide EX729 Disc Blue Rims with 20mm axle. 8" rotors front and rear and shimano 10 spd derailleur. Say what you want about these rims ... they were less than $180

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

100 views

Paint job is done. loosely based on the Navy's new blue digicam. (I'm a navy Vet) Still building it up, need to set up the derailleurs, chain, and wait for an axle. Rims are from Blueskycycling.com, most of the other components are from Pricepoint.com. I expect the bike to be done for just under $900, frame parts and all, and I included shipping of the parts in that

Quincy, Massachusetts

Mtnrider001: Cannondale-Gemini-900
in: Bikes - Freeride/DH

58 views

Bike's paint was a lil worn, needed to inspect the welds and whatnot so took off paint where I needed and then primed it flat grey. Wanted to keep the original decals though. Couldn't take them off so painted around them. Frame is in great shape.